Water Based Flag Red

Victory Factory Water Based Ink Series is an eco-friendly water base ink that has extremely vibrant colors, along with being the creamiest ink in the industry. This ink series is designed to get your shop printing with water base in the easiest possible way.
Features:

• Vibrant colors.
• Creamy Inks.
• Soft hand prints.
• Wet-on-wet printing.
• Short flash times.
• Low cure with drive additive

Stock Use:
100% Cotton
Details:
For single print colors, colors will reproduce best over white - light substrate or single white base plate on dark substrates. When direct printing over dark cotton, print-flash-print. For a lower curing temperature please use the Drive Additive. Add about 1.5% by weight to the ink, and it will lower the curing temperature to as low as 180 degrees.
Curing Instructions:
Flash at 250°F (121°C) for 3 - 5 seconds and cure at 320°F (160°C) – 350°F (177°C). Curing is not complete until all water moisture is removed from the ink, and ink reaches full temp. Air circulation in your dryer helps a lot with this process.
Storage Information:
Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date.
Compliance:
In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates